Material Safety Data Sheet Information and How to Apply Video

              

MATERIAL SAFETY DATA      CleanGrip Anti-Slip Cleaner

===========================================================================

PREPARED:  12-01-17                                                         EMERGENCY PHONE:  856-691-1700

ADVANCED SAFETY PRODUCTS

37 S. VALLEY AVENUE

VINELAND, NJ 08360

--------------------------------------------------------------------------------------------------------------------------------

SECTION II:  HAZARDOUS INGREDIENTS

 

HAZARDOUS INGREDIENTS                                  (CAS #)                  OSHA PEL              ACGIH TLV            OTHER LIMITS 

<5.00% AMMONIUM BIFLUORIDE                     (1341-49-7)                3 PPM                        N/A                                    N/A

SECTION 313 SUPPLIER NOTIFICATION

·          INDICATES HAZARDOUS INGREDIENTS WHICH ARE TOXIC CHEMICALS SUBJECT TO THE REPORTING REQUIREMENTS

·          OF SECTION 313 OF THE EMERGENCY PLANNING AND COMMUNITY RIGHT-TO-KNOW ACT OF 1986 AND OF 40 CFR 372.

 

THE CHEMICAL NAME AND CAS# INFORMATION MUST BE INCLUDED IN ALL MSDS COPIED AND DISTRIBUTED FOR THIS MATERIAL

 

SECTION III:  PHYSICAL/CHEMICAL CHARACTERISTICS

 

BOILING POINT:  212 DEGREES F                       SPEC. GRAVITY (WATER=1):  1.03

VAPOR PRESSURE (mm.HG.):  SAME AS WATER     MELTING POINT:  N/A

VAPOR DENSITY (AIR=1):  SAME AS WATER    SOLUBILITY IN WATER:  COMPLETE

EVAPORATION:  (BuAc=1):  SAME AS WATER 

APPEARANCE AND ODOR:  YELLOW LIQUID, SWEET ODOR

ph RANGE:  5.0-6.0

 

SECTION IV:  FIRE AND EXPLOSION HAZARD DATA

 

FLASH POINT (METHOD USED):  NONE            FLAMMABLE LIMITS:  N/A

LEL:  N/A                VEL:  N/A                                                EXTINGUISHING MEDIA:  NONE

SPECIAL FIRE FIGHTING PROCEDURES:  FIREFIGHTERS SHOULD USE SELF-CONTAINED BREATHING APPARATUS

 

SECTION V:  REACTIVITY DATA

 

PRODUCT IS STABLE.          CONDITIONS TO AVOID:  N/A            

INCOMPATIBILITY (MATERIALS TO AVOID):  AVOID CONTACT WITH OXIDIZERS.

HAZARDOUS DECOMPOSITION OR BY-PRODUCTS:  NONE

HAZARDOUS POLYMERIZATION WILL NOT OCCUR

CONDITIONS TO AVOID:  N/A

 

SECTION VI:  HEALTH HAZARD DATA

 

ROUTE(S) OF ENTRY:           INHALATION:  YES                               SKIN:  NO                               INGESTION:  UNLIKELY     

HEALTH HAZARDS (ACUTE & CHRONIC)

CAN CAUSE SOME SKIN IRRITATION IN SOME INDIVIDUALS.   PROLONGED SPRAY MIST INHALATION WILL HARM RESPIRATORY TRACT. 

 MEDICAL CONDITIONS GENERALLY AGGRAVATED BY EXPOSURE:  NONE KNOWN

 

**********EMERGENCY AND FIRST AID PROCEDURES**********

 

SKIN CONTACT:  IMMEDIATELY FLUSH WITH WATER FOR AT LEAST 15 MINUTES, IF SKIN IS IRRITATED, SEE A PHYSICIAN.

EYE CONTACT:  IMMEDIATELY FLUSH WITH WATER FOR AT LEAST 15 MINUTES, SEE PHYSICIAN.

INGESTION:  DRINK PLENTY OF WATER THEN MILK OR MILK OF MAGNESIA, GET MEDICAL ATTENTION.

INHALATION:  REMOVE TO FRESH AIR, ADMINISTER OXYGEN, GET MEDICAL ATTENTION.

SECTION VII:  PRECAUTIONS FOR SAFE HANDLING AND USE

 

WASTE  DISPOSAL METHOD:  DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE, AND FEDERAL REGULATIONS.

STORAGE & HANDLING:  STORE IN A COOL, DRY AREA.  KEEP CONTAINER CLOSED WHEN NOT IN USE.  KEEP OUT OF REACH OF CHILDREN.

SECTION VIII:  CONTROL MEASURES

 

VENTILATION:  LOCAL EXHAUST:  AS REQUIRED TO MAINTAIN TLV LIMITS.

SPECIAL:  N/A        MECHANICAL:  N/A   OTHER:  N/A   PROTECTIVE GLOVES:  RECOMMENDED

EYE PROTECTION:  RECOMMENDED

CleanGrip  Anti-Slip Cleaner for Bathtubs and Floors

 

SELF INSTALLATION INSTRUCTIONS

 

 

When used as directed, this specially formulated cleaning program will assist you in keeping your bathtubs, floors, and other surfaces anti-slip.  Follow the instructions provided and do not change any of the process.   

If you have any questions,  please call 1-877-882-4747

 

STEP 1: APPLYING CleanGrip Anti-Slip Cleaner on
Bathtubs/Showers or Floors

FOR IMMEDIATE ANTI-SLIP RESULTS

AND WHEN USING THE RECOMMENDED

 SIX MONTH APPLICATION PROGRAM

 

·        Close the drain and put on rubber gloves (Optional).  USE UNDILUTED. Spray the cleaner onto the surface of the tub or floor and wait about 30 seconds. Do small areas of the floor at a time. (about 200 sqft)

·        Use a non absorbent, non abrasive applictor pad and spread the treatment evenly around the entire surface

·        Wait about 3 - 15 minutes (depends on how white you want surface).  Again, spread around area with applicator pad.  You will feel resistance.

·        Open drain, turn on water and flood rinse tub/shower using applicator pad to assist in swishing water around tub. The tub is now ready for use. 
Flood rinse the floor, either mop with clean mop or wet vac water.

      There will be no residue and the surface does not need to dry. 

 

STEP 2: CLEANING AND MAINTAINING THE SURFACE AFTER TREATMENT

OR WHEN USING CleanGrip Anti-Slip Cleaner

AS PART OF YOUR

DAILY BATHTUB CLEANING PROGRAM or
FLOOR MAINTENACE PROGRAM

 

·        Mix a solution of 4 oz of CleanGrip Anti-Slip Cleaner with one gallon on water.  (or put one oz. of CleanGrip into a 32 oz. spray bottle).  Spray onto the surface, let it remain on the surface for about 2 minutes.  Wipe with sponge, cloth or pad.  Rinse.

·        May be used daily.  Daily use of CleanGrip diluted will result in the anti slip surface remaining anti  slip for the life of the tub/shower or floor surface and will assist in keeping the bottom of the tub clean (will remove grayish look) and germ free. 

 

10-01

 

 

 

 

 

 

                CleanGrip™ Limpiador pesado para Bañeras y Sola

 

AUTO INSTRUCCIONES de INSTALACION

 

Cuando se usa como dirigido, este especialmente formulado limpiando el programa le ayudará a mantener sus bañeras, a los pisos, y a otras superficies anti tropiezo. Debe las bañeras o los chaparrones son limpiados siguiendo diariamente los estándares exponen como en Nuestra Certeza, entonces nosotros justificamos que la superficie anti tropiezo se quedará efectivo para sextos meses siguiendo inmediatamente la instalación y puede quedarse efectivo hasta un año. Nuestra Garantía es limitada al reemplazo del producto sólo como usuario asume todo riesgo para el daño por el maltrato. Siga las instrucciones proporcionada y no cambie cualquiera del proceso. Si usted tiene cualquier pregunta, llama por favor 1-877-882-4747

 

 

DE UN PASO 1: APLICAR EL CleanGrip™ Limpiador pesado en Bañeras

PARA RESULTADOS ANTI TROPIEZO INMEDIATOS Y

CUANDO se USA EL RECOMENDO SEIS PROGRAMA de la APLICACION de MES

 

• Cierra el desaguadero y pone guantes de goma. UTILICE PURO. Rocíe el limpiador en la superficie de la tina o el piso y la espera acerca de 30 segundos

• Utiliza una almohadilla de aplicador y esparció el tratamiento uniformemente alrededor de la superficie entera • la Espera acerca de 3 - 15 minutos. Otra vez, cepilla levemente área con almohadilla de aplicador.

• Abre el desaguadero, la vuelta en agua y tina de aclarado de inundación que

utilizan almohadilla de aplicador para participar en mover agua alrededor de tina. La tina está ahora lista para el uso. No habrá residuo y la superficie no necesitan secar.

 

DE UN PASO 2: LIMPIAR Y MANTENER LA SUPERFICIE DESPUES DE el TRATAMIENTO

O CUANDO se USA CleanGrip™ Limpiador

pesado COMO PARTE DE SU BAÑERA DIARIA que LIMPIA el PROGRAMA

 

• Mezcla una solución de 4 oz de CleanGrip™ Limpiador pesado y Resbala el Tratamiento Resistente con un galón en el agua. (O puso una oz. de CleanGrip™ en una 32 botella del rocío de oz.). El rocío en la superficie, permitió que lo quedarse en la superficie para acerca de 2 minutos. Enjugue con spronge, la tela o la almohadilla. Aclarado.

 • Utiliza diariamente.

 

 

               

 

WHY DO TUBS

GET THAT GRAYISH – DIRTY LOOK

 

Most housekeeping departments use alkaline cleaners as their daily tub cleaner.  Alkaline cleaners are meant to encapsulate a dirt molecule, lift it into suspension and wash it down the drain.  If the staff member does not use an abundance of water in the rinse cycle, then the encapsulated dirt molecule does not wash down the drain.  It remains on the surface of the tub and imbeds itself into any micro etch, or factory installed anti slip surface thus filling that groove with debris and creating a smooth surface which can become slippery when wet, and will certainly become gray looking.   That is precisely why hotel tubs get that grayish, dirty look on their bottoms.  Using an abundance of water when rinsing will assist in keeping the tub clean and anti- slip.  If you must use an alkaline daily cleaner remember to use an abundance of water when rinsing.

 

GETTING THE GRAY OUT

 

When using an acid cleaner such as CleanGrip, the dirt molecule is actually emulsified (disintegrated), and the housekeeping staff member does not need an abundance of water to rinse.  This saves time.  As a bonus, any debris sitting in the grooves are targeted, so even after one application, the tub will be cleaner, brighter and whiter.  The more regularly CleanGrip is used, the cleaner and more slip resistant the tub will become.

 

 

CleanGrip Application Instructions for tubs and showers
Website Builder